Skip to main content
Fig. 4 | Animal Biotelemetry

Fig. 4

From: Development and validation of a drill attachment for faster and safer deployments of fin-mounted geolocators in large-bodied sharks

Fig. 4

Center and peripheral gear wheels. The lateral, top and cross-sectional views of A centered gear wheel with 20 teeth, B larger peripheral gear wheel with 16 teeth and C smaller peripheral gear wheel with 15 teeth are shown from left to right. All gear wheels have a tooth module of 1.5 mm. “A ” designates the sectional plane of the cross sections that are shown on the right side of the figure. All measurements are in millimeters. 12P7 represents tolerance levels of the components

Back to article page

Animal Biotelemetry

ISSN: 2050-3385