Skip to main content
Fig. 13 | Animal Biotelemetry

Fig. 13

From: An open-source platform for sub-\(\textrm{g}\), sub-\(\upmu\)A data loggers

Fig. 13

qtmonitor adxl362 configuration tab. The BitTag configuration provides a number of options for the ADXL362 accelerometer. The most important configurations are the activity detector thresholds and inactivity delay. In addition, the accelerometer sample rate (when active) can be configured along with the range. These configurations are provided to enable support for custom firmware—in the case of BitTag the defaults are generally accepted

Back to article page