This compilation of recommendations follows an earlier effort on implanted telemetry devices . A number of researchers that have published studies using ETDs or are actively using ETDs.Footnote 3 were contacted by the lead author with an invitation to participate. The intent was to include expertise from historic and contemporary studies, from both established and early career researchers with backgrounds in behavior, physiology, ecology, and veterinary medicine. Twenty-four of 30 contacted researchers participated, covering 29 pinniped speciesFootnote 4 in all oceanic and coastal regions of the world, as well as many estuaries, lagoons, and lakes. The authors’ collective expertise is based on approximately 6400 deployments over 445 person-years. Device types used include mechanical, opto-mechanical and electronic archival data loggers, and data transmitters using UHF, GSM and Argos data links. Location tracking devices include VHF, GPS and Argos, geolocation by light, as well as active acoustic and dead-reckoning-based location tracking while submerged. Device sensors used include ambient pressure, internal-, external-, and transmitted temperature, heat transfer (heat flux), movement speed (swim speed), triaxial accelerometer, magnetometer and gyrometer, electrocardiography, as well as a variety of environmental sensors. Animal-borne video and acoustic recording devices are a relatively recent addition to the repertoire. Experimental designs applied by members of the group include telemetric behavioral and physiological observations, as well as experimental manipulations including isolated ice hole work (see , translocations, cost of locomotion (drag) manipulations, and animal-borne active ensonification. Projects include work on wild animals and those in captivity (both permanent collection residents, and those held temporarily). Attachment techniques applied have changed considerably over the decades and include hog-rings in the early years, anklets, harnesses, bolts (e.g., through interdigital skin on flippers), and many types of adhesives. Programmable or remote-controlled release mechanisms have also been used. Capture and restraint methods include head-bagging, netting in water and on land or ice with hoop nets, throw nets, purse nets, and tangle nets, underwater noosing, and chemical immobilization by dart or by direct injection. Restraint and sedation techniques include the use of restraint boards and injectable and inhalant anesthetic agents.
To assemble a list of contemporarily relevant recommendations that describe the current state-of-the-art, participants were asked to each provide their fifteen most important recommendations. All responses were compiled, identical or substantially overlapping recommendations were combined, and similar recommendations were grouped into related classes. This led to an initial list of 100 recommendations with a substantial level of redundancy (Additional file 1: Table S1).
Participants were then asked to indicate whether any of these 100 recommendations should be removed because: (a) it is already obligate or required by legislation or permits (6 eliminated), (b) is already covered by an extant best practice compilation (4 eliminated), (c) is not current state-of-the-art, but is instead a desired future development (9 eliminated), (d) deemed too prescriptive (1 eliminated), (e) insufficiently broadly important for a best practice recommendation (2 eliminated), or (f) the recommendation should be combined with one of the others listed (3 combined). Any single suggestion of removal resulted in an initial elimination or combination, and participants could object to any of these eliminations, but none were contested.
The remaining 68 recommendations were grouped in 19 classes, and participants were asked to rank their top 15 classes. Rankings were compiled and averaged, and the 6 lowest ranked put to vote for either retention (2) or combination with others (4) or elimination (none). This resulted in a final 15 classes of closely related recommendations.
These classes are presented here as the 15 most important recommendations derived by the 24 authors.
Best practice recommendations
Pinniped researchers have primarily relied on their own experience tagging animals, knowledge gained from colleagues, and information from select published studies to justify and improve the use of external telemetry devices (ETDs) and to design experiments and devices. Here, we propose 15 specific recommendations to guide investigators and regulators in preparing and reviewing applications of ETDs in pinnipeds based on our collective experience over the past decades. We specifically exclude fully or partially implanted devices, where the entire device is implanted or where a portion of a device, other than the attachment mechanism, breaks the integument (see  for best practice recommendations on implanted devices). The recommendations are grouped into the following seven broad categories: justification, capture, tag design, tag attachment, effects assessments, preparations, and reporting.
A. Justification of the use of ETDs, selection of appropriate experimental design and choice of subjects
1. The use of ETDs should be justified for specific experimental designs in view of risks for and effects on animals, importance of data, and potential alternatives.
Bateson’s cube  and its more recent application in a conservation framework  considers the ethical risk of and support for research based on three parameters: the quality and importance of the research, the certainty of benefit to the species under study (where any protected status of the species of interest should be considered), and the animal suffering caused by a study. Thus, quality and benefit of the research are required to justify any animal suffering. For any particular study, animal suffering can also be reduced by consideration of the Three Rs: Reduction, Refinement, Replacement . Generally, Reduction is interpreted as the use of fewer animals. Collaborations and the possibility of combining multiple projects or experiments can reduce the number of animals used, which may also reduce the number of projects at one site and instances of group disturbances. Sample size may also be reduced by collecting more or higher-resolution data per subject. Refinements are improvements in experimental procedures that result in fewer negative effects on animals or improved animal welfare. For example, smaller tags or fewer tags per individual have the potential to reduce or eliminate drag-related energetic costs associated with ETDs. Replacement avoids the use of animals altogether, finding alternative ways to obtain the desired information. For example, this could be implemented through the use of existing high resolution, high density data sets that may lead to enhanced opportunities to use computer models to simulate animal responses to situations or the environment. Other alternatives to ETD use might include: direct or remote video observations of individual animals using temporary, permanent, or natural markings; genetic studies; acoustic tracking; as well as other approaches. However, replacement may not necessarily be a viable option. Valid justifications for ETD studies include: the predicted data recovery probability with sufficient statistical power, resolution, or sensitivity is too low for any alternative; the alternatives are likely to result in greater impacts on individuals or greater disturbances to large groups; or simply that important data cannot be collected by any other means. In addition to these ethical considerations that may influence experimental design, ETD studies are further affected by the need to consider mode and likelihood of data recovery. Tag failure and non-recovery (e.g., loss of transmitting tags or failure to recapture animals instrumented with archival tags) will affect the balance between possible negative effects on animals versus benefits of the research.
2. Conduct a sample size estimation during project planning.
The required number of ETD deployments should be estimated during the project design phase via an appropriate a priori power analysis, when possible for non-exploratory hypothesis testing and where analyses are specified at the design stage (see . However, this is only possible where data on variance are available or can be projected or modeled. Where such information is not available, exploratory or proof of concept projects on a few animals might be warranted. An alternative estimation based on a review of published telemetry studies by study type in relation to their sample sizes has been proposed . Studies using ETDs should also consider realistic deployment durations and available data on activity (proportion of time spent in relevant activity such as diving or migrating). An appropriate sample size estimation should account for possible failure at several key places: tag electronics and operational software, tag attachment, animal recapture and/or data recovery—any of these may increase with planned deployment duration. For long deployments (e.g., more than a few months), the likelihood of natural mortalities must be considered. Higher-resolution devices, higher sampling rates, or longer-duration deployments may enable smaller sample sizes, under some circumstances. Project planning should also include data recovery strategies that are based on realistic projections, but potential effects of these strategies (e.g., recapture) also need to be considered and where possible accounted for. For recaptures, knowledge of seasonal patterns in site fidelity may be important. Common data recovery approaches could be supplemented through novel, emerging technologies (e.g., shore-based, automated Argos message relay systems (e.g., , or the installation of mobile telephony repeaters).
3. Optimize ETD selection, programming, and collection of ancillary data.
Critically evaluate available technology to select the ETD to best meet project objectives. Sensor selections, ranges, sensitivity and resolution should be considered, as well as battery life, storage capacity, and available attachment configurations based on device design. Device and sensor selections as well as programming need to be appropriate for study species and expected behavior . Optimal device programming typically requires knowledge of duration and magnitude of the effects to be monitored. Short-duration events and those of small magnitude require higher sampling rates and greater resolution to detect . Ideally, instruments that minimize hydrodynamic effects on animals are preferable to those that are bulkier and less streamlined. Combining functions into fewer instruments is preferable as long as this configuration does not unnecessarily increase instrument size and drag, as is maximizing the information collected from all available sensors. We specifically recommend maximizing the collection of all possible ancillary data if this can be done with no or little additional effect to the animal. This approach can significantly enhance the value and interpretability of the data and power of the study, can support the Reduction component of the Three Rs, and can also enhance future opportunities to Replace (via re-use of data for other studies). Recommended ancillary data for ETD studies includes collection of morphometric measurements and tissue samples to allow estimation of body condition (see , baseline health assessments (e.g.,  and age determination  at the time of capture and ETD deployment, but could also include application of long-term or permanent, natural or applied markings (see [94, 118], behavioral observations, resights, and collection of environmental data.
4. Select appropriate research subjects.
The most appropriate experimental group composition for the question should be determined in view of possible tag and procedure impacts. Criteria to consider include sex, age, and size, as well as body condition or reproductive state. Following this a priori determination of group composition, experimental designs should consider establishing in situ animal selection criteria. When the selection is not critical to the sampling design (i.e., differences in health status, size, age or other criteria are not the focus of the study), animals with lower risk of complications or those likely to have a lower population-level impact, could be selected (e.g., larger or older animals, males). The inclusion or exclusion of animals as a function of their health status (e.g., body condition, injuries) is an important ethical consideration and can also increase data return probability and enhance data quality. However, use of such criteria may introduce biases in estimates (e.g., behavior or survival) that may or may not be correctable if the interest lies in understanding the entire population (see . It is important to also consider and minimize potential subject selection biases based on location, time of year, animal capture procedures, and animal behavior. Timing of captures in relation to the pelage molt will affect ETD deployment duration and data recovery probability. We further recommend to derive and apply a post hoc study inclusion criterion: unless otherwise proven, it should be assumed that animal manipulations and ETD attachment will affect a subject’s behavior, at least initially (see also Recommendation #11). The study inclusion criterion should be based on the empirical determination of the time after which behavior and data are no longer affected by the treatment.
B. Capture and restraint
5. Minimize manipulations, duration of restraint and captivity.
Initiating an acute stress response is unavoidable when capturing and handling wild animals , however the application of best practices can reduce the likelihood of stress progressing to highly negative outcomes such as capture myopathy (e.g., [102, 109]. While the use of chemical restraints to mitigate capture and handling stress is widely used as standard practice in pinnipeds (see Figs. 3b, 4, 5), there is a large degree of individual variation in behavioral and physiological response to capture stress even with the use of sedatives and tranquilizers . Manipulations of research subjects should be kept to a minimum and the duration of restraint, transport and temporary captivity should be carefully considered within the framework of what is needed to achieve study goals while minimizing the negative impacts on individuals . Multiple handling events should be well justified and their effects accounted for .
Researchers should only use appropriate handling and sedation methods (recommendations #6 and #7) with trained personnel (recommendation #14) to make the manipulations as efficient as possible and minimize negative effects. The use of temporary captivity should be carefully considered especially due to the extended stress that it may impose on study subjects. Every effort should be made to release all individuals at the same location at which they were captured. A special case of this may be where individuals equipped with ETDs are translocated to investigate aspects of energy expenditure and dive behavior over a known distance (e.g., [3, 36, 48, 72, 73, 83, 93, 120]. While translocation is already a common tool for ETD studies in pinnipeds, every effort to minimize stress should be taken during handling and transport of subjects and the method should be well justified within the study framework .
In addition to minimizing the effects of capture and restraint on target animals, researchers should also consider the potential effects of research operations on non-target animals and/or other species within the study area. When working in a breeding area, researchers must consider whether and to what extent the presence of a capture team may cause other individuals to change their behavior and flee the capture location. For instance, researchers may need to weigh the impact of capturing two animals at a time against disturbing an entire colony twice. The impact of captures on nearby individuals will vary by species. In addition, ETD studies often target pinnipeds during the reproductive season. When capturing lactating females with young, dependent pups (classification of young is species dependent), pups should be maintained nearby either within a natural crèche or within a pup box, bag, or net. Upon release of lactating females, pups should be released simultaneously nearby or adjacent to the female and researchers should make every effort to reunite mothers and pups where possible to minimize the chance of abandonment.
6. Use appropriate capture and restraint methods.
The method used to capture and restrain an animal should minimize risk, stress, and pain to the subject while also ensuring the safety of personnel. Pinniped species vary widely in their habitat choice, response to human presence , physiological reactions to both physical and chemical restraint, and the danger that they pose to researchers . Consequently, specific immobilization methods vary between species and situations; careful consideration is needed to develop a capture plan, and research teams should always include personnel experienced with the study species (see also Recommendation #14).
The Society for Marine Mammalogy provides specific guidelines for three aspects of animal capture: (1) the design of physical restraint equipment, (2) when some form of anesthesia should be used, and (3) drug and technique choices . These guidelines provide a useful framework when designing a plan for handling any pinniped species for ETD attachment. Three chapters on pinniped capture and immobilization in Zoo Animal and Wildlife Immobilization and Anesthesia  provide a good starting point for developing new capture plans, although the focus is on work with captive animals and it is still critical that investigators work with researchers experienced with the species and system in question. Researchers should frequently search for new literature on novel techniques and revised drug recommendations to refine their established protocols (e.g., [1, 10, 13, 56, 69, 79, 85, 86, 92, 96].
Whenever possible, adding ETD attachment to already scheduled anesthesia procedures is worthwhile. While sedation and anesthesia can reduce stress to the animal and danger to personnel , they do pose risks to the animal [46, 95]. Species-specific monitoring and emergency protocols should be established prior to handling any animals and should outline vital signs (respiration rate, heart rate, capillary refill, palpebral reflex, etc.) to be monitored throughout handling. In the event that an animal responds poorly to handling, contingency measures outlined in the emergency protocol should be followed under the guidance of the most experienced person present (see also recommendation #14).
7. Recognize and manage potential thermoregulatory stress and protect eyes during capture and restraint.
Being on land exposes pinnipeds to unique thermoregulatory demands that are not similarly experienced by fully aquatic marine mammals, and pinnipeds have been shown to elevate body temperature when challenged with warmer external temperatures, suggesting they are moving beyond their thermoregulatory limits [67, 115, 122]. Small or very young animals and those in poor body condition may experience hypothermia in cold climates, especially while sedated. Researchers should understand the thermoregulatory mechanisms of the species and/or taxon  and age class  with which they are working. Since normal behavioral mechanisms for thermoregulation are restricted during capture, restraint and sedation, animal temperature should be closely monitored during handling, if possible (e.g., via visual behavioral monitoring for stress, movement, panting, salivation, or via infrared thermography, or rectal or tracheal thermometry). Signs of thermoregulatory stress in mammals are described by Silanikove , and additional thermoregulatory considerations for wildlife work can be found in Sikes . Prevention of thermoregulatory stress can be initiated during project design by considering or managing conditions (ambient temperature, wind and availability of windbreak or shade) at the procedure location. In cases where the study animal appears to become overheated, researchers should cool tissues of strong thermoregulatory value, including fore and hind flippers, with water .
Animals may experience eye damage during prolonged exposure to solar radiation; this risk is enhanced by a decreased ability to blink during sedation or anesthesia. Eyes should be covered with a UV-resistant and non-abrasive material during restraint to both protect the eyes and to reduce stimulus to the captured animal. In addition, a gel-based solution of artificial tears can be applied to protect the eyes of the animal. Under light sedation, animals may retain some visual acuity, so covering the eyes will not only aid in protection, but also will help to reduce handling stress for most species.
C. Tag design
8. Optimize and validate safe tag designs.
ETDs can have measurable effects on their host animals: they may increase the cost of locomotion or thermoregulation, alter foraging, social and reproductive behavior, change the detectability of hosts by predators or prey, or increase the risk of entanglement [42, 89, 117]. In extreme cases, negative effects of ETDs could lead to injury or even death of the host. Designs should, therefore, minimize these risks by optimizing: device size in terms of footprint, shape and drag (including aspect ratio and frontal area), mass and density (weight in air, and buoyancy), the shape and length of external device components (length and size of external sensors and cables, and of antennae) and the drag these cause, and attachment location (in terms of drag and interference with normal behaviors)—where possible. The color and sensory appearance of the tag, both to the host animals and others, particularly predators/prey, also warrant consideration (see recommendation #12).
Another critical device design and selection aspect is the pressure rating. Electronic tags, in particular those containing lithium batteries, can critically fail when pressurized beyond design depth. This can lead to burns and other injuries. For implanted telemetry devices, where such failures are likely fatal, a margin of safety aiming for 3× the average reported maximum depths (for target animals) was recently proposed . A similar safety margin would also be appropriate for external devices. Users should also consider the potential for tag ingestion by a predator, which might necessitate considering predator dive depth in choosing tag depth rating.
Finally, the environmental impact of discarded, non-recovered tags should be considered. The occurrence of derelict tags should be minimized, and for non-recovery projects, minimizing the use of toxic or reactive materials (heavy metals, certain battery electrolytes) should be favored.
D. Tag attachment
9. Optimize tag attachments.
The attachment method and instrument location will be influenced by the size of the device and project goals. With recent miniaturization, direct attachment methods have become increasingly effective. Different attachment locations are subject to different constraints. Head-mounting generally improves transmission frequency and quality but restricts device size and likely increases the hydrodynamic load, and may have other unmeasured effects on behavior. Back-mounting often allows for attachment of larger devices, but exposure constraints limit uplinks. Accelerometers and other sensors may detect different activities or behaviors depending on attachment location, and device-induced hydrodynamic drag may also differ. Tag removal may be more challenging from some attachment areas than others (e.g., it may be more difficult to remove tags attached to the head). Additionally, the optimal choice for attachment method and location will be influenced by environmental conditions, animal habits and haul-out substrate (e.g., rocky shores, sandy beaches, ice, or mostly pelagic habits).
Where possible, attachment locations should be chosen to minimize effects on animals, and methods should be appropriate for planned deployment durations while minimizing handling (i.e., a permanent attachment may not be appropriate for a tag with a short battery life). Devices should not be placed directly over highly flexible areas, or on joints. The footprint should be minimized while also minimizing likelihood of tag loss. Generally, there is no need for a footprint larger than the tag. Harnesses or other high-drag attachments with high entanglement likelihood should only be used for very short periods and under highly controlled conditions such as captive or trained animal projects, or possibly translocation experiments, and only when risks can be mitigated (e.g., in a controlled setting or via the use of corrodible links in harnesses). Overall, the ease and safety of device removal should be considered. To maximize the chances for recovering data from ETDs that might be shed and found by humans or retrieved by hunters from species taken for subsistence, identifying information should be displayed on devices; this is also important to subsistence users who may wish to know the history of a harvested animal that has been tagged.
10. Select suitable attachment materials and appropriately test and apply.
Modern adhesives are probably the most common form of ETD attachment to the pelage of pinnipeds , see Figs. 1b, d, 3. This is highly effective and generally very safe, but improper application can result in skin irritation, skin abrasions and punctures, burns or other skin damage, and secondary infections (see ). Exothermic setting adhesives (two-component epoxies and accelerated cyanoacrylates) generate heat (often subject to environmental conditions) that can result in severe, third-degree burns. This can be avoided by reducing the amount and depth of adhesive applied, sequential application of multiple thin layers rather than a single thick layer, the reduction or avoidance of accelerants, minimizing direct sun exposure, or the application of cooling packs or pre-cooled tags. However, there is a trade-off between reducing generated heat and impeding adhesive curing, and in extremely cold climates heat packs may be required to maintain temperatures adequate for curing. Mechanical action and wear of attached tags can sometimes be mitigated by soft transitional or carrier material such as neoprene, but such layers may also trap heat during the setting reaction. Fur can also effectively serve as a transitional material if tags are glued to only the outermost layer of the pelage (Fig. 3b). Directly gluing to the skin should be avoided, if possible. For archival devices that require recovery and for multiple deployments (e.g., double translocation), consider easy removal and reattachment methods to avoid reapplying glue, such as gluing netting to the pelage and attaching ETDs with cable ties (see Fig. 1d). Overall, the thermal and chemical properties, processing time, attachment life, and ease of removal of adhesives should be carefully selected to minimize adverse effects, and reasons for product selections described in publications of methods, if possible.
E. Effects and impact assessments
11. Plan, conduct and report on short-, medium- and long-term assessments.
The deployment of ETDs can cause behavioral changes, may affect welfare and even survival of the host animal, and could also influence the data collected. It is important to include effects assessments in study designs both in terms of basic principles of the scientific method, as well as principles for the ethical treatment of research animals. Even for modern miniaturized ETDs attached in comparably non-invasive ways, impacts have been investigated, and effects reported in the form of increased drag, cost-of-transport, and thermoregulatory expenses [72, 74, 98, 117, 118, 125, 126]. When transmitting devices ‘go off the air’ (i.e., transmissions cease to be received), battery exhaustion, device or attachment failures are often assumed, but process- or device-related fatalities are rarely considered, and long-term effects rarely studied. Devices and procedures may also generate effects beyond the data collection period that may only become apparent through control studies or continued monitoring.
As a result, possible effects should be considered and assessed across three broad time periods:
(a) Short-term effects ranging from hours to days that are most likely related to capture and manipulations, and may inform a study inclusion criterion (see Recommendation #4). Examples may include stress and anxiety through separation from conspecifics, and effects related to sedatives including disorientation, reduced appetence, mobility, or altered vigilance.
(b) Medium-term effects ranging from days to months are critical in determining possible influences on data. Until demonstrated otherwise, it should be assumed that tagged animals may exhibit increased cost of locomotion or altered performance, which may also affect their foraging ability and other behaviors. Some studies have found measurable energetic effects even for small devices , while other studies have found no such effects .
(c) Long-term effects ranging from months to years, possibly beyond the data collection period. Some effects may have low level accumulating impacts that may become more detectable when integrated over longer periods of time, or over multiple sequential deployments [8, 72, 126]. Suitable metrics for effect assessments should be carefully chosen, since effects may occur outside of the selected suite of primary experimental metrics. Short- and medium-term effects could be studied at the level of proximate mechanisms, and long-term effects could more readily be assessed via ultimate impacts on growth (including growth of dependent offspring), migration, and fitness (e.g., . The selection of appropriate control groups is an important aspect of effects assessment that can also enable creative approaches. For example, assessments can be based on classic comparisons to un-instrumented, non-manipulated control animals, or alternatively on animals carrying different types of external or internal devices with previously quantified effects. Experimental animals serving as their own controls may also be an option, through second observation periods with altered device configurations, or simply through extended observation periods (e.g., ). Any recaptures or resights of tagged animals should include efforts to assess status and evidence of effects. Often, such studies may be enabled through common, concurrent population monitoring programs based on marked or tagged individuals. Alternative assessment approaches may include captive animal studies under controlled conditions, such as energetic studies on device-altered cost of locomotion (e.g., [72, 98]) or cost of thermoregulation (e.g., ). Any evidence of effects should be addressed and incorporated into refinements.
It cannot be assumed that ETDs will have no impacts simply because no effects have been found in some other devices or on a different species, since effect magnitudes appear to be specific to device shape, mass, size, attachment method and location, as well as animal state and circumstances . For example, animals may have a greater buffer to adjust to increased device drag when conditions are good, but have no or limited ability when conditions are poor or food is scarce. The likelihood of an effect for a species/device combination is, therefore, never certain, and studies should be conducted with caution. It is prudent to carry out and report control studies when possible (but note Recommendations #1 and #2) [17, 118].
12. Validate ETDs for any new tag/species combination.
Given the range of possible effects of ETDs and procedures on their hosts, and in view of evidence of specificity of effects [89, 125, 126], it is important to assess effects for every new device/attachment—species combination, and to mitigate or minimize any detectable effects. For critically listed (i.e., endangered) species, the absence of negative effects should be validated, where possible, on a suitable surrogate species (i.e., similar or related, but not critically listed), or on stranded animals after rehabilitation (and see also Recommendation #4).
13. Consider active and passive device detectability.
ETDs may alter the detectability of animals to conspecifics, predators or prey, in a variety of ways based on different senses. Tags and attachments may be more or less visible depending on size, shape and coloration. All electronic tags produce electromagnetic signatures through periodic sensor sampling, operational activities, transmissions, or by their metal mass (e.g., battery) moving through salt water. Tags may generate active and passive acoustic signatures that could be detected by predators or prey. Such emissions could also be perceived by host animals and alter behavior. Tags may also be echogenic, altering the detectability of their hosts by predators employing active echolocation. ETDs should be selected and attached in a manner that minimizes these effects.
F. Training, testing and preparation
14. Preparation and training.
The capture and handling of animals has inherent risks for both the animal and personnel involved. Guidelines provided by both the Society for Marine Mammalogy  and the American Society for Mammalogists  direct researchers to ensure that personnel working with animals in the field have appropriate training and experience to ensure the safety of those involved and the successful collection of data.
Pinniped captures can be particularly risky for both animals and researchers if team members are not adequately prepared. Generally acknowledged risks include physical injury, hyperthermia, excessive stress and capture myopathy, overdose of sedative drugs—some of which can lead to death in extreme cases, but also mother–pup separation or aggression by conspecifics, as well as zoonoses (diseases transmitted from animals to humans) and zooanthroponoses (diseases transmitted from humans to animals). Research teams should be of sufficient size and experience to capture, instrument, monitor, and safeguard the animals and to respond to emergencies if necessary. This should ideally include species- and location-specific experience. All team members should have clearly designated roles and responsibilities, and should be familiar with pertinent emergency response plans. Appropriate emergency drugs and equipment must always be present and personnel need to be familiarized with their use prior to animal handling.
Careful preparation and planning are essential for successful and safe work in the field and help to minimize unfruitful animal handling. All ETDs should be tested prior to attachment on animals. This includes testing that all sensors and transmitters are functioning correctly, that clocks are appropriately synchronized to allow for subsequent time drift correction, and that tags will not interfere with each other if multiple instruments are to be deployed on an individual. For custom-built housings and instruments, it is critical that devices are pressure tested beyond the maximum expected dive depth of the target species. Some ETDs may require pre- and/or post-deployment calibration (i.e., swim speed sensors, fluorometers, etc.) to maximize the accuracy of the data collected.
In addition, when working with a new protocol or new crew, running through the steps of the capture and instrument attachment procedure ahead of time will help to increase efficiency and minimize confusion in the field. This process should be mirrored after field work has been completed. Taking the time to debrief after animal handling procedures is an essential step to refining protocols, enhancing the training of less experienced personnel, and increasing efficiency for future deployments.
G. Reporting, analyses, data management
In support of the application of the Three Rs, it is critically important that all findings are reported in readily accessible (e.g., Open Access) peer-reviewed literature. Once published, all metadata (preferably in standardized format), data and analysis code/scripts should be placed in a discoverable and accessible repository. Publications should specifically describe details that are integral to effects assessments, and thus to future refinements, and should minimally include these metrics: tag attachment method (e.g., glue type) and location, footprint size of tag/glue area, tag mass, density (or buoyancy) and frontal area. If a tag is of a novel or unique design, a photo is appropriate to illustrate shape, coloration, and visibility. It is also highly recommended to report observed data collection durations and data recovery rates, and if possible distinguish between end of record modes (battery exhaustion, attachment failure, predation/mortality, or unknown). Publications should include reports of problems encountered, effects observed, and should suggest improvements.